Sản phẩm
DIN Abrasion Tester
Application:
It is used to determine wear performance test of materials like elastic material, rubber, tires, conveyor belts, conveyor belts, shoe soles.
Feature:
Body paint baking processed, easy for maintenance. Equipment with digital counter, automatically stop after test finished.
Principle:
Under certain touching pressure and contact area, sample becomes a certain angle with sandpaper and determine its abrasion performance caused by a certain level of sandpaper. Pack sandpaper outside the surface of roller. The sample is pressed against the roller with sandpaper, which makes sample lateral moving along roller. Abrasion is caused under the other side of cylindrical specimens measuring the mass loss of sample value and count the wear amount by sample density.
Standards:
DIN-53516, JIS-K6369, JIS K6264-2,GB/T 20991 section 8.3,GB/T 20265, GB20266-2006, GB/T 9867, EN ISO 20344 section 8.3, AS/NZS 2210.2 section 8.3, ISO 4649, SATRA TM174, BS903-A9 Method A, ASTM D5963, ISO20871, QB/T2884, SATRA TM 193, EN 12770
Key Specification:
| Model | GT-KB03 |
| Diameter of wear wheel | 150 mm |
| Specimen dimension | ø16.2 mm x thickness 6-10 mm |
| Specimen moving speed | 4.2 mm/r |
| Weights | Holder 2.5N, can be used arbitrarily with optional accessory 2.5N, 5N (each for one) |
| Wear wheel speed | 40±1rpm |
| Inclination angle | 3°, Test piece support shaft of test piece becomes vertical angle with roller. |
| Grit size of sandpaper | #60 |
| Roller length | 460 mm |
| Wear stroke | 40 m |
| Power supply | AC 220V 50/60HZ 3A |
| Dimensions (L x W x H) | 700 x 300 x 300 mm |
| Weight | 55kg |
